Optical MUX (Multi-service optical multiplexer) it's most salient characteristic is to transmit multi-service interfaces via optical .The equipment is posed by the ultra-large-scale integrated circuits, high performance, high quality.Provide E1, V.35, Ethernet, telephone and other kinds of interface. Modularize design, support Hot Swap.
Typical network program:
Application Diagram 1
Application Diagram 2
Main Technical Parameter ：
Optics Wavelength：1310nm or 1550nm
Transmit optical power：no less than -10dBm
Receive sensitivity：no more than -37dBm
Dynamic range： wide dynamic range
Network: point--to-point,point-to-multipoint
Power supply：AC 220V or DC-48V
Connections：FC
Power consumption：<15W/system
External dimensions：Standard 19-inch 1U structure （OMUX-4）
Interface：E1，V.35， Ethernet, Voice，V.24 and RS232
E1 Interface
Interface card types : single E1, double E1
Nominal bit rate ：2048Kbit/s
Line code：HDB3
Impedance ：75Ω，120Ω
Conforn to ITU G.703 |
|
V.35 Interface
V.35 standard rate support pure 2048Kibt/s and N*64Kbit/s two, users can choose one of them via dial switche.
DTC / DCE mode base on the cable
Data and clock level comply to the ITU-T V.35. |
|
Ethernet interface
Interface rate： 10/100M self-adaptive
Transmission Rate: pure 2M support or transparent transmission pure 10M, Users can choose their own practical needs.
Duplex mode: supports half-duplex mode, full duplex mode
Physical interface：RJ45
Full compliance with IEEE 802.3 LAN standards |
|
Telephone Interface Board
East characteristics with the 《 Ministry of Posts and the total telephone exchange technical specifications》 |
|
Optical MUX uses the latest large-scale digital integrated circuits and thickness mode technology. It can transmit the E1, V.35, Ethernet, V.24, RS232, telephone and other digital signals via a pair of fiber.
Optical MUX prominent feature : compact, convenient, easy operational. According to the actual needs of user to choose the different interface .No interfere within different signals in one fiber cable
|
