<%@LANGUAGE="VBSCRIPT" CODEPAGE="65001"%> Fiber Optic Modem-Yucoo Network Equipment Co., Limited
Specialized Manufacturer of
Telecom Equipments
7×24H Technology and Sales

Tel:

+86-20-85558835
+86-20-85558952


Fax:
+86-20-85572403

E-Mail:
yucoo99@gmail.com
Yoko.yucoo@yahoo.com.cn
picture
Cooperation partners:
 Position : Home >> Fiber Optic Modem
 Fiber Optic Modem
Product Introductions

Fiber Optic Modem also known as single-port Fiber Optic Modem such as E1 fiber optic modem, V.35 fiber optic modem, Ethernet fiber optic modem. Such equipments can be mix use with each other. .The equipment used large-scale integrated chip circuit is simple, low power consumption, high reliability Alarm state with a comprehensive network management functions and complete instructions.

Application diagram :

Network Management:

  Network Management and Network Management Card through integrated network management software can stand vertical cell YKD-16 the business cards of all network access equipment and distal unified network, network management system is the management platform of centralized network equipment, which is used for management, maintenance and operation of all series communication equipments manufactured by our company, namely the equipments manufactured by our company can realize the centralized management in the same environment, such as Fiber Optic Modem, interface converter, optical fiber modem and so on; and we will develop and manufacture our products towards the direction of all communication equipments, and therefore can save the investment of human power and physical resources and reduce the management cost for customers.

Main Technical Indexes:

Main Technical Indexes

 Optical Interface
   Wavelength:1310nm
  Transmission power:not less than-10dBm
  Receiving sensitivity:not more than -37dBm
  connections:FC

 E1 Interface
   Nominal rate :2048Kbit/s
  Line code:HDB3
  Impedance:75Ω
  Conform to ITU-TG703 suggestion 

  V.35 Interface
  V.35 standard rate support, and pure 2048Kibt/s N*64Kbit/s two, users can choose their own
  DTE DCE under way so it definitely choose from line-level data and the ITU-T recommendations V.35 clock

  Ethernet interface
  Interface rate : Support 10/100M self-adaptive;
  2M net support transmission speeds 10M, both pure and transparent transmission, users can choose their own practical needs
  Duplex mode:supports half-duplex mode, full duplex mode
  Physical interface :RJ45
  Full compliance with IEEE 802.3 LAN standards
 Power supply
  Voltage:AC 180V~240V
      DC -36V~-72V
   Power:< 5W

   Working environment
  Working temperature: -10℃~50℃
  Storag temperature: -40℃~+70℃

 

Series products
Type Allocation and Networking Photo (Click to zoom in)
YKD-OM-E1 Single E1 Fiber Optic Modem
Single E1 Fiber Optic Modem: 1pc G.703 E1 interface
YKD-OM-V35 Single V.35 Fiber Optic Modem
Single V.35 Fiber Optic Modem: Provide 1pc N*64Kbit/s V.35 interface. DB25
YKD-OM-LAN2 Ethernet Fiber Optic Modem(2M bandwidth) 2M bandwidth Ethernet Fiber Optic Modem: Provide 1pc 2M bandwidth Ethernet interface. RJ45 (match use with single E1 and E1 converter)
YKD-OM-LAN10 Ethernet Fiber Optic Modem(10M Bandwidth) 10M bandwidth fiber optic modem: provide 1pc Ethernet interface and 4pcs E1 interface. Ethernet interface bandwidth 2-10M adjustable. if increase the bandwidth, it must occupy the E1 interface. Each increase 2M bandwidth, much occupy 1pc E1 interface. When Ethernet bandwidth is 10M, the other 4pc E1 interface is not available. (match use with 5E1 multiplexer and 5 E1 converter)
YKD-16 Integrated Network Management Rack Integrated Network Management rack can be inserted Optical-Modem, Fiber Optic Modem and the converters slot. .Unified network management card to satisfy users a centralized network management and maintenance of all equipment. Provide 16 service slots and 2 power supply slots.
Copyright© 2003-2011 www.gzyk.com All rights reserved
YUCOO NETWORK EQUIPMENT CO.,LIMITED All right reserved
Email:Yucoo99@gmail.com MSN:yoko.yucoo@hotmail.com
ICP证号码:粤ICP备06098111号